Abstract: Intelligence has become an indispensable part of life. From the electric cooker to the current intelligent pressure cooker, after several stages of development, the functions of the intelligent pressure cooker and the technology applied internally are constantly improved. What is the working principle of intelligent electric pressure cooker? How to use intelligent electric pressure cooker? Let's have a look!

How to use intelligent electric pressure cooker

1. Cover opening: first hold the handle of the cover with your hand, turn the cover clockwise to the limit edge, and then lift the cover up

2. Take out the inner pot and put food and water into the inner pot. The food and water shall not exceed 4/5 of the height of the inner pot; The food that is easy to expand in water shall not exceed 3/5 of the height of the inner pot; Food and water shall not be less than 1/5 of the height of the inner pot.

3. Put the inner pot into the outer pot: before putting it into the outer pot, wipe the inner pot and the heating plate clean, and the outer pot and the surface of the heating plate shall be free of sundries; After putting it in, gently rotate the inner pot left and right to keep the inner pot in good contact with the heating plate.

4. Check whether the sealing ring has been placed on the inner steel ring of the pot cover, hold the handle of the pot cover, cover the pot cover, and then rotate the pot cover anticlockwise to close the position, and hear the "click" closing sound

5. Place the pressure-limiting vent valve, turn the pressure-limiting vent valve to the "sealed" position, and check whether the float falls down

6. Power on

7. Press the corresponding function key according to the cooking food, the corresponding function indicator light will be on, and the heating and pressure boosting will start. The display screen will display the word "one", and scroll up and down (the time will be displayed after entering the pressure maintaining)

8. Appointment timing time setting: press the "Appointment timing" key to set the appointment timing time. The display increases by 0.5 hours. Press and hold the "Appointment/Timing" key to set the appointment timing time in a cycle. The maximum appointment time is 12 hours. After setting the reservation time, select the corresponding function, and the machine will start to count down by 0.5 hour. After the countdown is completed, the machine will heat and boost according to the selected function.

9. When the pressure is increased, the display screen shows the pressure holding time and decreases in a countdown manner. After the pressure holding is completed, the buzzer rings three times and the heat preservation indicator lights up, indicating that the cooking process is completed and the heat preservation status is entered. The heat preservation indicator lights up or flashes. Turn the pressure limiting vent valve to the "exhaust" position to release gas until the float valve falls

10. Pull off the power plug, hold the handle of the pot cover with your hand, turn the pot cover clockwise to the limit edge, and then pick up the pot cover upwards, then you can eat it.

Introduction to the use of intelligent electric pressure cooker

If you want to use smart electric pressure cooker to make delicious food, then its use method is what we must master. What are the steps of using smart electric pressure cooker, and we will introduce them one by one.

1. Before using the intelligent electric pressure cooker to make food, the pressure cooker should be checked first. At this time, it is necessary to check whether the exhaust pipe of the electric pressure cooker is unblocked, and check whether the pressure-limiting vent valve, float valve and safety eye are not blocked. In addition, it is also necessary to ensure that the sealing ring and steel ring are tightly installed in place to prevent air leakage during use.

2. Before opening the cover, ensure that the safety eye of the electric pressure cooker falls down, hold the upper cover handle with one hand, turn it clockwise to the limit edge, and then lift the cover up.

3. Take out the liner and put food and water into the liner. The food and water put in should not exceed 4/5 of the liner height, the food that is easy to expand should not exceed 3/5 of the liner height, and the food and water should not be less than 1/5 of the liner height.

4. Before putting the liner back into the electric pressure cooker, the bottom of the inner cooker and the heating plate need to be wiped clean, and there should be no sundries left on the heating plate. After placing the inner cooker, gently rotate it to ensure good contact between the inner cooker and the heating plate.

5. When closing the cover, check whether the sealing ring has been put back into the steel ring of the upper cover. At the same time, hold the handle of the upper cover tightly and place it flat on the limit edge to ensure the stability of the upper cover. Then turn it counterclockwise until the upper cover is closed, and hear the sound of closing.

6. Place the pressure-limiting vent valve and confirm that the pressure-limiting vent valve is in the sealed position. (Note: no object can be placed on the pressure limiting valve to add the weight of the pressure limiting valve)

7. After the preparation is completed, connect the power supply of the electric pressure cooker. At this time, the electric pressure cooker booster light will be on. Select the corresponding cooking procedure, and set the pressure holding time according to the time of food cooking.

8. After the food is cooked, it needs to wait for a period of time, and then open the float valve to release the steam in the pressure cooker. After the steam is released, open the lid of the pressure cooker and take out the food.